184 Napier Street, South Melbourne, 3205
Victoria, AUSTRALIA
Tel: 61-3-9699 8844
>> Email Enquiries <<

The iTView DV specially designed for the iMac DV. And really works very well !

Here are some helpful notes, tips and advice to help you out in case you have problems or questions.
Let us know if there are any other items of wisdom we can mention that you may have used successfully yourself. Make this list work for everyone's benefit :)


• How good is the picture quality.
  Actual customer feedback: "Brilliant ! Very good picture quality".



• Does iTView DV work on an IBM PC.
  No. It is software controlled via the I-MAC VGA output. So you can't control it from a PC.



• Usage on PAL TV's.
  iTView DV is software controlled via the I-MAC VGA output. Software controls the NTSC/PAL setting. NTSC is default. So if you have a PAL TV connected it may show picture in black and white or distorted picture or no picture at all until you set it up. Simply select PAL mode form the software control panel.



• Power light does not come on but power is connected.
  The light on the front of iTView DV is not a simple power indicator. It is quite normal for the light to be off when power is connected and for both the power supply and the iTView DV to be running warm. The light indicator will ONLY come on when the iTView DV is plugged into an iMac that has the iTView DV software loaded and running correctly.



• Does not work. What can I do.
  Following has been provided by Focus Enhancements USA as suggestions:
  Try installing the following:
  Check to see if it applies to your setup first, of course.
  
  Video Extension v1.0, http://asu.info.apple.com/swupdates.nsf/artnum/n11676
  
  Apple DVD Player v2.2 http://asu.info.apple.com, Update News.../Localized
  
  OS 8.6 to OS 9.0.4 http://asu.info.apple.com Featured Software/GoToMAC OS 9.0.4
  
  TURN OFF: Mac Manager (control panel)
  
  TURN OFF: MultiUser Startup (Extension) then restart.
  
  
  Discussion:
  Here is the information for MultiUser Startup:
  MultiUser startup version 1.3 is part of MacOS cpu software 2.2. I disabled MultiUser startup extention as requested. That fixed the problem. Now the iTView control panel loads properly and no longer crashes at the end of a cold boot before the Control Strip appears!!! Next I turned Multi-user startup back on to verify. But it still won't crash despite all the previous crashes when i-TView and MultiUser were turned on. The i-TView just needs to load before MultiUser. In any case - it now works perfectly - thanx!
  All it took to solve the problem was Apple DVD Player 2.2. I did install 9.0.4, too, but then it crashed everytime I ran the DVD player. Now it works just fine, especially after some color adjustment. Thanks for all your help.
  

Where can you buy it ? It's quick and easy !

You can visit one of our resellers in your area (not all resellers support all products) or order directly from MICRONICA if you like:

Micronica On Line Order Service

Dealers In Your Area

---

[ On Line Ordering | MICRONICA Main Page | Product Catalog ]

---